background image

184

Service and maintenance

Service and

maintenance

General information ................... 184

Service information .................. 184

Recommended fluids, lubricants

and parts .................................... 186

Recommended fluids and

lubricants ................................ 186

General information

Service information

In order to ensure economical and

safe vehicle operation and to

maintain the value of your vehicle, it

is of vital importance that all

maintenance work is carried out at the

proper intervals as specified.
The detailed, up-to-date service

schedule for your vehicle is available

at the workshop.
Severe operating conditions exist if

one or more of the following

circumstances occur frequently: Cold

starting, stop and go operation, e.g.

for taxis and police vehicles, trailer

operation, mountain driving, driving

on poor and sandy road surfaces,

increased air pollution, presence of

airborne sand and high dust content,

driving at high altitude and large

variations of temperature.
Service display 

3

 52.

Summary of Contents for Movano 2021




















































































































































































































Reviews: