Vauxhall Movano 2021 Owner'S Manual Download

Page: 116 / 211

114

Driving and operating

If active emergency braking is

applied,

flashes in the Driver

Information Centre.
Depending on the situation, the

vehicle may automatically brake

moderately or hard.
Emergency automatic braking may

slow the vehicle to a complete stop

trying to avoid a potential crash. If the

vehicle comes to a complete stop,

automatic braking is maintained for

up to 2 seconds.
If the vehicle comes to a complete

stop, the engine may stall.
Operation of the function may be felt

by a slight vibration in the brake

pedal.

Warning

Emergency automatic braking is

an emergency crash preparation

feature and is not designed to

avoid crashes. Do not rely on the

system to brake the vehicle.

Emergency automatic braking will

not brake outside of its operating

speed range and only responds to

detected vehicles and

pedestrians.

Operation conditions and system

limitations

In some cases, the active emergency

braking system may provide an

automatic braking in situations that

seem to be unnecessary, for instance

in parking garages, due to traffic signs

in a curve or due to vehicles in

another lane. This is a normal

operation, the vehicle does not need

service. Firmly apply the accelerator

pedal to override the automatic

braking if the situation and the

surroundings permit.
The system is only operational when

the ESC is not faulty, TC is activated

and all passenger seat belts are

fastened.
ESC and TC

103.

Driving at a steady speed on roads

with few bends is required.

Cases of non-detection by the

system:

● Pedestrians, cyclists, animals,

objects on the road.

● Vehicles crossing the lane.
● Vehicles driving in the opposite

direction.

Pay particular attention when narrow

vehicles (e.g. motorcycles) are

present, there are vehicles staggered

across the traffic lane and / or when

entering a tunnel or crossing a bridge.
Suspend the system when:

● there are vehicles in a tight bend.
● approaching a roundabout.
● a vehicle cuts in sharply between

your vehicle and the one in front.

In the following cases, active

emergency braking performance is

limited:

● Driving on winding or hilly roads.
● Detecting all vehicles, especially

vehicles with a trailer, tractors,

muddy vehicles, etc.

● Detecting a vehicle when

weather limits visibility, such as in

fog, rain, or snow.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands