Vauxhall Movano 2021 Owner'S Manual Download

Page: 106 / 211

104

Driving and operating

Warning

Do not let this special safety

feature tempt you into taking risks

when driving.
Adapt speed to the road

conditions.

Control indicator

56.

Deactivation

TC can be deactivated, everytime it is

required: press ASR OFF.
The LED in the button ASR OFF

illuminates.

A status message appears in the

Driver Information Centre when TC is

deactivated.
TC is reactivated by pressing the

ASR OFF button again.
The LED in the button ASR OFF

extinguishes when TC is reactivated.
TC is also reactivated the next time

the ignition is switched on.
Reactive the system as soon as the

level of grip permits.

Intelligent traction control system

The system operates on roads with

low grip (e.g. snow, ice, mud, etc.). It

enables the detection of situations of

precarious grip which can complicate

the starting and the progress of the

vehicle.
In these situations, the intelligent

traction control system overrides the

TC by transferring the driving force to

the wheel with the greatest contact

with the ground to optimise traction

and trajectory tracking.
Intelligent traction control is

deactivaed after each engine start.

Activation / Deactivation

At speeds below approx. 19 mph,

press

. The LED in the button

is illuminated to confirm the

activation of the system.
If the speed exceeds 19 mph, the

system is paused. The LED in the

button

is still illuminated. The

system is automatically resumed if

the speed falls below 30 km/h.
To deactivate the system, press

The LED in the button

extinguishes to confirm the

deactivation of the system.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands