manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

The Vauxhall Movano 2021 Owner's Manual is your comprehensive guide to operating and maintaining this exceptional vehicle. Gain access to vital information, troubleshooting tips, and detailed instructions, all available for free download at manualshive.com. Maximize your Movano's potential with this essential manual, ensuring a smooth and enjoyable ownership experience.

Share
Download
background image

Vehicle care

169

Temporary spare wheel

The use of tyre chains is not permitted

on the temporary spare wheel.

Tyre repair kit

Minor damage to the tyre tread can be

repaired with the tyre repair kit.
Do not remove foreign bodies from

the tyres.
Tyre damage exceeding 4 mm or that

is at tyre's sidewall cannot be repaired

with the tyre repair kit.

9

Warning

Do not drive faster than 50 mph.
Do not use for a lengthy period.
Steering and handling may be

affected.

In the case of a flat tyre:
Apply the parking brake and engage

first gear, reverse gear or P.
The tyre repair kit is stored in a bag,

placed in one of the front doors.

It includes:

● a quick user guide for the repair

kit

● a cartridge, containing the

sealeant

● a compressor equipped with a

pressure gauge and connectors

● adapters for the inflation of

various components

1. Filler hose with a ring at the end.
2. Compressor
3. Switch with position (off/on): 

J

 / I

4. Pressure gauge

5. Cartridge, containing the sealant;

sticker on the top marked with

max. 80 km/h to affix after the

repairing on the instrument panel.

6. Hose to check and restore tyre

pressure

Repair the tyre

1. Unscrew the valve cap from the

defective tyre.

2. Take out the filler hose and screw

the ring nut onto the tyre valve.

3. The switch on the compressor

must be set to 

J

.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Related manuals for Movano 2021

Yakima K343 Manual preview
K343
Brand: Yakima Pages: 11
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
RAM Ram Dodge 2010 Owner'S Manual preview
Ram Dodge 2010
Brand: RAM Pages: 616
Nav TV AUDI-P60H Install Manual preview
AUDI-P60H
Brand: Nav TV Pages: 9
Honda Clarity 2018 Owner'S Manual preview
Clarity 2018
Brand: Honda Pages: 81
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Safe Fleet PRIME DESIGN VBI-FT21B Manual preview
PRIME DESIGN VBI-FT21B
Brand: Safe Fleet Pages: 12
Honda Plusone Console 4521011B User Information preview
Plusone Console 4521011B
Brand: Honda Pages: 4
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Needit Park Mini User Manual preview
Park Mini
Brand: Needit Pages: 2
Gemini KIT ParkingSensor 814 Installation And Use Manual preview
KIT ParkingSensor 814
Brand: Gemini Pages: 6
Mercedes-Benz A 150 Owner'S Manual preview
A 150
Brand: Mercedes-Benz Pages: 305
Volvo S90 TWIN ENGINE Owner'S Manual preview
S90 TWIN ENGINE
Brand: Volvo Pages: 662
FVC Sprinter Bed System DIY Installation Manual preview
Sprinter Bed System DIY
Brand: FVC Pages: 8

Brands by name

Popular brands

Load more brands