Lighting
69
It switches automatically back to low
beam when
● a sensor detects the lights of
oncoming or preceding vehicles.
● driving in urban areas.
● the vehicle is slower than
15 km/h.
● it is foggy or snowy.
● front or rear fog lights are
switched on.
If there are no restrictions detected
and the vehicle is faster than
40 km/h, the system switches back to
high beam.
Activating
Turn the adjuster wheel in position:
2
Press the button MODE and select
the the required settings.
Vehicle personalisation
Driver Information Centre
Activate the high beam assist by
pulling the indicator lever.
The green control indicator
2
illuminates continuously when the
assist is activated, the blue one
7
illuminates when the high beam is on.
Deactivating
To deactive the high beam assist, turn
the adjuster wheel in position:
D
If a headlight flash is activated when
the high beam assist is activated and
the low beam is on, the high beam
assist will be deactivated. The system
changes to high beam.
If a headlight flash is activated when
the high beam assist is activated and
the high beam is on, the high beam
assist will be deactivated. The system
changes to low beam.
To reactivate the high beam assist,
flash the headlights again.
Headlight flash
To activate the headlight flash, pull
the lever briefly without passing the
resistance point.
High beam
68.