Vauxhall Movano 2021 Owner'S Manual Download

Page: 113 / 211

Driving and operating

111

Turn the adjuster wheel to

, the

last programmed speed and a

message are displayed in the Driver

Information Centre.
The system is still not active.

Activation of the functionality

Press the button to activate the

system with the last programmed

speed.
Press the button once again to pause

the activation of the system.

Setting speed

To set the speed, the system does not

have to be activated.

Move the control lever u or

downwards -. The chosen speed is

set.
The preset speed can then be

changed by moving the control lever

u to increase or downwards

- to decrease the speed.
Briefly press increases or decreases

the speed by 1 mph, a long press by

5 mph.
The speed value is indicated in the

Driver Information Centre.

Exceeding the speed limit

In the event of an emergency, it is

possible to exceed the speed limit by

depressing the accelerator pedal

firmly nearly to the final point.
Release the accelerator pedal and

the speed limiter function is

reactivated once a speed lower than

the limit speed is obtained.

Deactivation of the functionality

Press the button to deactivate the

functionality. The speed limiter is in

pause mode and a message is

displayed.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands