Body conversions
201
and push the release levers
downwards to engage the locks
fully.
Insert locking pins into the left and
right rear pivots.
Isolation switch
The system must be activated using
the isolation switch located on the left-
hand side of the chassis. Insert the
key after removing the protective cap.
When the tipper is not in use, remove
the key and attach the protective cap.
Raising and lowering the tipper
The tipper is operated using the
remote control located by the front
seats.
The remote control enables the user
to supervise the operation of the
tipper from outside the vehicle.
Press switch:
â
: raise
ã
: lower
When the tipper is active an acoustic
signal sounds.
The tipper can be stopped at any time
by releasing the switch.
The tipper body will cease moving
automatically when it reaches the
maximum height.
Store the remote control in the holder
when not in use.
Safety prop
The safety prop is located under the
tipper body and is provided only to
assist in supporting the empty tipper
body when tipped to the rear, for
carrying out visual inspection of the
vehicle components.
Using the safety prop
1. Prepare the tipper body for tipping
to the rear.
2. Raise the tipper fully.
3. Raise the safety prop to align with
support on the tipper.
4. Lower the tipper body until the
safety prop is in contact with the
tipper.
Stowing the safety prop:
1. Raise the tipper body sufficiently
to release the safety prop from its
support.
2. Lower the safety prop into the
stowed position.
3. Lower the tipper body.
