manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

The Vauxhall Movano 2021 Owner's Manual is your comprehensive guide to operating and maintaining this exceptional vehicle. Gain access to vital information, troubleshooting tips, and detailed instructions, all available for free download at manualshive.com. Maximize your Movano's potential with this essential manual, ensuring a smooth and enjoyable ownership experience.

Share
Download
background image

Driving and operating

99

Electric drive unit

The vehicle is equipped with an

electric drive unit that contains a 1-

gear transmission. The drive selector

is located on the centre console next

to the steering wheel.

D : drive mode

N : neutral

R : reverse gear, engage only when

the vehicle is stationary

Shifting

Shifting always starts from N and is

operated by pushing the respective

button. Once operated, the button of

the selected gear is illuminated.

The selected gear is indicated in rear

view mirror display.
Neutral N

In this position, the propulsion system

does not transfer torque to the

wheels. When the ignition has been

switched on, the drive selector is

always in mode N.
The electric drive unit will shift to N

automatically if the driver's door is

opened.

A message is displayed in the Driver

Information Centre accompanied by a

warning chime.

9

Warning

It is dangerous to get out of the

vehicle if the parking brake is not

firmly applied. The vehicle can roll.
Do not leave the vehicle when the

propulsion system is running, the

vehicle may move suddenly. You

or others can be injured. To be

sure the vehicle will not move,

even if the vehicle is on a level

surface, always apply the parking

brake and select N.

Reverse gear R

Use this gear to reverse.
To shift into and out of R:

1. Bring the vehicle to a complete

stop.

2. To shift into R, depress the brake

pedal and press R.
To shift out of R, depress the

brake pedal and shift into the

desired gear.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Related manuals for Movano 2021

Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
Cadillac 2000 Warranty And Owner Assistance Information preview
2000
Brand: Cadillac Pages: 32
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Curt Manufacturing 31048 Installation Instructions Manual preview
31048
Brand: Curt Manufacturing Pages: 6
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Skoda Fabia II 2007 Workshop Manual preview
Fabia II 2007
Brand: Skoda Pages: 165
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2
Gacell 13553 User Manual preview
13553
Brand: Gacell Pages: 12
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Cadillac Fleetwood Brougham Sedan 1966 Owner'S Manual preview
Fleetwood Brougham Sedan 1966
Brand: Cadillac Pages: 56
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
Chrysler Dodge Caravan 2002 Manual preview
Dodge Caravan 2002
Brand: Chrysler Pages: 2399

Brands by name

Popular brands

Load more brands