manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

The Vauxhall Movano 2021 Owner's Manual is your comprehensive guide to operating and maintaining this exceptional vehicle. Gain access to vital information, troubleshooting tips, and detailed instructions, all available for free download at manualshive.com. Maximize your Movano's potential with this essential manual, ensuring a smooth and enjoyable ownership experience.

Share
Download
background image

130

Driving and operating

Mode 3 charging cable

1. Vehicle plug
2. Plug for wall box / AC charging

station

Mode 3 charging cables are used for

charging at wall boxes and AC

charging stations. A mode 3 charging

cable provides a vehicle plug and a

plug for the wall box / AC charging

station. Wall boxes / AC charging

stations may provide an integrated

mode 3 charging cable. For more

information on the mode 3 charging

cable, refer to the manual of the

charging cable manufacturer.

Mode 4 charging cable

Notice

Only use DC charging cables shorter

than 30 metres.

Mode 4 charging cables are used for

DC charging. Since mode 4 charging

cables are integrated within DC

charging stations, they only provide a

vehicle plug.

Charging

In order to ensure the compatibility of

plug and outlet, different labels are

used. The labels are located on the

inside of the vehicle's charging port

flap. Make sure to connect only a

cable of the same type.

Type 2 plug or outlet used for AC

charging

FF plug or outlet used for DC charging

9

Warning

Avoid any entry of fluids into the

charging port of the vehicle, the

vehicle plug of the charging cable

and the domestic electrical outlet.

When charging at a public AC

charging station / public DC charging

station, follow the instructions for the

use of the respective charging

station. Public AC charging stations

may not provide an integrated

charging cable. In this case, a

portable mode 3 charging cable is

required.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Related manuals for Movano 2021

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Brand: Mazda Pages: 12
Uebler X21 nano Mounting And Operating Instructions preview
X21 nano
Brand: Uebler Pages: 56
Qeedon Higlow Series Product Instruction preview
Higlow Series
Brand: Qeedon Pages: 2
walser ULTIMATE SPEED 296713 Assembly And Safety Advice preview
ULTIMATE SPEED 296713
Brand: walser Pages: 10
Mercedes-Benz 2009 E-Class Manual preview
2009 E-Class
Brand: Mercedes-Benz Pages: 373
Webasto Telestart T70 Installation Instructions Manual preview
Telestart T70
Brand: Webasto Pages: 23
Mopar 82214480 Manual preview
82214480
Brand: Mopar Pages: 17
CITROËN Jumpy Miltispace Owner'S Handbook Manual preview
Jumpy Miltispace
Brand: CITROËN Pages: 164
Directed MIT4 Firmware Specific Manual preview
MIT4
Brand: Directed Pages: 30
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Toyota Tacoma 05 Brochure & Specs preview
Tacoma 05
Brand: Toyota Pages: 26
Dodge 2004 JR41 Stratus Sedan Owner'S Manual preview
2004 JR41 Stratus Sedan
Brand: Dodge Pages: 273
Chrysler DODGE AD100 1993 Service Manual preview
DODGE AD100 1993
Brand: Chrysler Pages: 1502
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Brand: Road Ranger Pages: 3
Comelit KCA2074 Technical Manual preview
KCA2074
Brand: Comelit Pages: 20
Jeep Compass 2013 User Manual preview
Compass 2013
Brand: Jeep Pages: 116

Brands by name

Popular brands

Load more brands