Vatech GREEN SMART, User Manual

Page: 25 / 200

3. Warnings and Precautions
Green Smart User Manual 17
EN
G
LISH
Lasers

The system incorporates Class 1 laser products. The light localizers used in this
product are intended for correct patient positioning and must not be used for any
other purpose.

For maximum safety, advise the patient not to look directly at the laser beam.

While adjusting the patient, ensure that the laser beam is not directed at the patient’s
eyes.

Wavelength: 650 nm, Radiant power: Max. 039 mW
Risk of eye injury!
Do not use this equipment with any other laser sources and do not
make any changes to the settings or processes that are described in
these operating instructions.
Cleaning

Never expose this equipment to liquids, mists or sprays. Exposing this equipment to
liquids may cause an electric shock or otherwise damage the system.

Do not use spray cleaners on this equipment, as this could cause a fire.
During the Operation

Never use this equipment in an environment that is susceptible to explosion.

Do not place flammable materials near this equipment.

Do not operate the PC while the equipment is operating. Failure to comply with this
instruction may result in system malfunction.

Immediately stop imaging if the equipment malfunctions in any way.

If a problem occurs during imaging, press the red Emergency Stop Switch to
immediately stop all moving parts and cut off all power to the equipment’s electrical
components.

Never touch the patient while he or she is touching the SIP/SOP connectors.

The medical electrical equipment or medical electrical system should not be used
adjacent to or stacked with other equipment and that if adjacent or stacked use is
necessary, the medical electrical equipment or medical electrical system should be
observed to verify normal operation in the configuration in which it will be used.

The use of accessories and cables other than those specified, except cables sold by
VATECH of the medical electrical equipment or medical electrical system as
replacement parts for internal components, may result in increased EMISSIONS or
decreased IMMUNITY of EQUIPMENT or SYSTEM.