Vatech GREEN SMART User Manual Download Page 98

Page: 98 / 200

8. Acquiring CEPH Images (Optional)

Green Smart User Manual

8.3.1 Lateral / Full Lateral (Optional) Mode

Correct posture reduces the shadow cast by the patient's cervical spine

and allows clear image acquisition.

Patient Positioning

Turn the Nasal Positioner to the

Lateral

mode Positioning Marker as shown below.

Leave enough space between the Ear Rods.

Use the Porion Position Reference Indicator that appears in the acquired

image to easily confirm the location of Porion.

Guide the patient to the CEPH unit.

Direct the patient to relax his/her neck and shoulders and stand upright.

Use the

Column UP/DOWN

button or switch option to adjust the height of the CEPH unit

to approximately match the height of the patient.

After adjusting the height of the column, align the Ear Rods and Nasal

Positioner to the patient.

Summary of Contents for GREEN SMART









































































































































































































Search results

Summary of Contents for GREEN SMART

Reviews:

Related manuals for GREEN SMART

Brands by name

Popular brands

Vatech GREEN SMART, User Manual

Search results

Summary of Contents for GREEN SMART

Reviews:

Related manuals for GREEN SMART

Brands by name

Popular brands