5-15
Valco Cincinnati, Inc.
Section 5 - Operation
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Glue Modes
Normal Mode
Normal Mode
Normal Mode
Normal Mode
Normal Mode
Normal mode is the default gluing mode.
Stitch Mode
Stitch Mode
Stitch Mode
Stitch Mode
Stitch Mode
Stitch mode is used for discontinuous lines. This mode is useful for
economical application of long lines of glue. It allows different input possibility
of bead length and gap length. Intermittent gluing is also possible. The control
will then take into account that each pattern ends with applied glue (not with a
gap). It can cause the gap to deviate slightly from the entered value.
Jogging Mode
Jogging Mode
Jogging Mode
Jogging Mode
Jogging Mode
Jogging mode is used for extremely low speeds. Jog-speed gluing is
activated or deactivated using the V-jogging speed setting, input possibility of
dot size, and gap length.
