5-23
Valco Cincinnati, Inc.
Section 5 - Operation
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
To configure the inspection sensor(s), do the following:
1.
On the Main Menu Screen, press the Inspection Sensor Button.
The Inspection Sensor Configuration Screen appears.
Configure the
Inspection
Sensor(s)
2.
On the Inspection Sensor Configuration Screen appears, you can
set different tolerances. Press the tolerance you want to change
and a keypad will appear. Enter the desired tolerance and press
the Confirmation Button on the keypad to return to the Inspection
Sensor Configuration Screen.
Figure 5-27. Inspection Sensor Configuration Screen
Figure 5-26. Main Menu Screen
Measured Glue Position
Tolerance Modes
Inspection Enable
Target Glue Position
Setup Menu
Diagnostics
Tolerance Menu
Volume Tolerance
Current Volume
Volume Enable
Learn Volume
Inspect Unglued Areas
Start Tolerance
End Tolerance
1
2
3
User Selectable Mode
Inspection Sensor
Button
