3-1
Valco Cincinnati, Inc.
SECTION 3 - BASIC FEATURES
SECTION 3 - BASIC FEATURES
SECTION 3 - BASIC FEATURES
SECTION 3 - BASIC FEATURES
SECTION 3 - BASIC FEATURES
VCX Control
The VCX Control for the 3-Valve Boardrunner gluing system consists of a
Power Supply Module (148xx063) and PCM-4 Module w/EPC (074xx054) in a
base assembly. Three slots are available in the base assembly for
addidtional modules (Inspection Control Modules [ICM]).
Figure 3-1 illustrates the VCX Control base with the Power Supply Module and
Pattern Control Module (PCM). Notice that the Power Supply Module is
always on the left side of the control. Additional modules are added from left
to right. Always place the Tracking Control Module(s), if used, in the slot(s)
on the right.
Figure 3-1. VCX Control
*Do NOT carry the entire
control by the cover handle.
This handle is only used when
attaching and removing the
cover.
