5-18
Valco Cincinnati, Inc.
Section 5 - Operation
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
Pressure Transducer Setup Dialog
- Continued
Name
Use
Pressure Transducer Number
The number of the pressure transducer being edited.
Speed for each point on the
curve
Displays the speed of the machine at each point on
the pressure curve.
Pressure for each point on the
curve
Displays the pressure (%) of the valve at each point
on the pressure curve.
Pressure Curve
Displays a visual representation of the pressure curve
for the transducer.
Current Pressure
Displays the current pressure.
Number of Points on the
Pressure Curve
Displays the number of points in the pressure curve.
Press for a numerical keypad to edit.
Machine Stop (Idle) Pressure
When the machine stops, the valve will automatically
be set to this pressure. Use this feature to keep
adhesive ready to apply (but not dispensing) during
machine stops. Press for a numerical keypad to edit.
Confirmation Button
Press to enter the new settings. (No settings or values
are entered until this is pressed.)
Cancel Button
Cancel the new settings and return to the previous
settings. (Use before pressing the Confirmation
Button.)
