4-9
Valco Cincinnati, Inc.
Section 4 - Setup
MC091 - VCX OT-120 FlexosealPro 2 - Corrugated
5.
Set the Control Selector Switch on “VCX -2” to “2” (see Figure 4-
7).
6.
Replace the covers on both VCX Controls (see Figure 4-1).
7.
Connect the cables on the “VCX -1,” the “VCX -2,” and the OT-
120 Unit as shown in Figure 4-8.
8.
Reconnect the power.
9.
Perform the power up sequence.
Linking Two VCX Controls -
Continued
Figure 4-8. Connecting the Cables
The encoders can be linked together as
shown above.
Out
In
1
Out
In
“VCX-1”
“VCX-2”
Control Link Cable
CAN Resistor “Off”
CAN Resistor “On”
