Telnet Command Reference
Vaddio's Telnet command protocol allows external devices
to control the camera. It is a high-level, text-based command
line interface supported via Telnet session to the camera.
Network connectivity and a Telnet client are required; Telnet
port 23 is used. Telnet sessions require the administrator
account login.
In addition to the camera control commands, Telnet session
management commands are available - help, history, and
exit.
Things to know about Telnet:
n
The > character is the command prompt.
n
Using a question mark as a command parameter will bring up a list of available subcommands or
parameters. Example:
camera focus ?
camera focus
near
Focus the camera near
far
Focus the camera far
stop
Stop the camera focus
mode
Camera focus mode
n
CTRL-5 clears the current serial buffer on the device.
Typographical conventions used in this manual:
n
{ x | y | z}
– Choose x, y, or z. Example: camera led { on | off | toggle }
n
<variable>
– Substitute the desired value here. Example: camera ccu get <param>
n
< x - y >
– Valid range of values is from x through y. Example: camera ccu set detail <0 -15>
n
[parameter]
– Parameter is not required. Example: camera pan left [<speed>]
56
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
