Camera Switch Settings
Both models use a rotary switch to set the video resolution. The RoboSHOT 20 UHD camera uses DIP
switches to set some basic camera behaviors; the RoboSHOT 40 UHD camera uses "soft DIP switches"
in the web interface to set these behaviors.
A label on the bottom of the camera provides a quick reference for setting the switch or switches on the
back. After the camera is installed, you can read all switches from the camera's web interface.
Set the switch or switches on the back of the camera before mounting the camera.
Video Resolution Selector
Set the desired output resolution for the camera with the rotary switch.
Notes
The maximum resolution for the HD-SDI output and the IP stream is 1080p.
On the RoboSHOT 20 UHD, when the video output is set to 1080p/29.97 or 1080p/25 (rotary switch
positions 4 and 5), the HDMI output is at double the specified frame rate, with each frame doubled. Other
outputs deliver the specified frame rate. This is a limitation of the camera hardware.
On the RoboSHOT 40 UHD, zoom is limited to 30x at 2160p.
7
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
