RoboSHOT 40 UHD: Back of the Camera
From left to right:
n
12 VDC, 3.0 A power connector
– For local power. Not used when connecting the camera to a
OneLINK device or a PoE++ power injector. Use only the 12 VDC, 3A power supply.
n
OneLINK HDBaseT connector
– Network connectivity for streaming and control; also for power if a
PoE++ injector or OneLINK device is used.
n
HDMI connector
– HDMI video output.
n
SDI connector
– 3G-SDI video output.
n
Sync connector
– For genlock signal.
n
RS-232 port
– Allows an external device to control the camera using a modified VISCA protocol. See
RS-232 Serial Communication Settings and Port Pin-outs
.
n
Camera Settings rotary switch
– Sets the video output resolution.
Note
A label on the bottom of the camera lists the physical switch settings.
6
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
