To access the camera's Networking page during installation (skip this procedure if the camera
has already been in service on this network):
1. Connect the camera according to the connection diagram, but
do not connect the camera to the
network.
2. Connect the network port on the camera to the network port on a computer. Depending on the
computer, you may need a crossover cable.
3. On the computer, open a browser and access the camera's web interface at
http://169.254.1.1
.
4. Log in as admin. The default password is
password
.
5. Navigate to the Networking page.
24
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
