Installing the Wall Mount
The camera is shipped with a Thin Profile Wall Mount. Other mounting options are available as well.
Contact us if you don't have the camera mount you need.
If you are installing a OneLINK camera extension system with the camera, attach the EZIM (the smaller
unit) to the camera mount and route the camera cables through the opening before you install the mount.
Refer to the Quick-Start Guide supplied with the OneLINK extension, or to the OneLINK manual available
at
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
n
If you mount it to drywall, use the wall anchors provided with the wall mount.
n
If you mount it to a wall box, use the cover plate screws supplied with the wall box.
About Ceiling-Mounted Cameras
If you use an inverted mount, set the camera's Image Flip DIP switch ON for inverted operation. See
Switches: Camera Behavior Settings
for more information.
Note
On the RoboSHOT 40 UHD, this setting is available using the corresponding soft DIP switch on the
System page of the web interface. See
Software Switch Settings – RoboSHOT 40 UHD Only
.
10
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
