Options for Power and Other Connections
Use the provided 12 VDC power supply –
As shown in the Basic Connections section, this set-up
requires separate connections for power, network, control, and video output.
Use a PoE++ power injector –
Connect to the network and to power through a PoE++ power injector.
Video output and RS-232 control (if used) require separate connections. In most cases, you do not need to
use the camera's 12 VDC power supply in this configuration.
Connect the camera to a OneLINK
®
device –
A single Cat-5e (or better) cable to the
OneLINK/HDBaseT connector provides power, control, network, and video connectivity. Network, video
output, and RS-232 control are connected at the OneLINK receiver. Do not use the camera's 12 VDC
power supply in this configuration.
This example shows basic connections for a RoboSHOT 20 UHD camera using a OneLINK HDMI
extension. Connection details vary depending on the equipment and functionality to be used in your
installation.
13
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
