
System Administration
Administrative tasks are on these pages of the web interface:
n
Networking – Ethernet configuration, time zone and NTP server
n
Security – Passwords, guest access, other IT security-related settings
n
Room Labels – Helpful information to display in the web interface
n
System – Controls to reboot, reset to factory defaults, and run firmware updates, read the rear panel
switches, and access the soft DIP switches
n
Help – Contact information for Vaddio Technical Support and a link to the documentation for this
product
n
Diagnostics – Logs to help Vaddio Technical Support troubleshoot issues
Note
Vaddio's RoboSHOT series cameras all have very similar web interfaces. Some of the screen shots in this
manual may be from other models in the RoboSHOT series.
Some of the screen shots in this manual are from the RoboSHOT 20 UHD web interface; some are from
the RoboSHOT 40 UHD web interface. Any differences will be noted.
For Non-DHCP Environments: Configuring the Device with a Static IP
Address for Initial Installation
N
ETWORKING PAGE
Caution
Consult your IT department before editing network settings. Errors in network configuration can make the
camera inaccessible from the network. Do not change DHCP/Static addressing, IP address, subnet mask,
or gateway unless you are very familiar with the characteristics and configuration of the network where you
install the camera.
By default, the camera is set to DHCP and you do not need to configure it with a static IP address.
However, if no DHCP server is available to automatically assign an address, the camera will use the
default IP address of 169.254.1.1. If this is the case, you may need to follow this procedure.
If you install more than one camera on a network that does not automatically assign IP addresses (a non-
DHCP network), follow this procedure to prevent IP address conflicts.
Note
If the camera is currently at an IP address other than 169.254.1.1, skip this section unless you are
instructed to configure the camera with a static IP address.
23
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras