VADDIO RoboSHOT 20 UHD, Complete Manual

Page: 3 / 104

For Non-DHCP Environments: Configuring the Device with a Static IP Address for Initial
Installation 23
Changing the Camera's Hostname 25
Optional For DHCP Environments: Changing from a DHCP Address to a Static IP Address 26
Specifying Time Zone and NTP Server 27
Managing Access and Passwords 28
Disabling Telnet Access 28
Enabling or Requiring HTTPS 29
Adding Room Information to the Camera's Web Interface 30
Saving (Exporting) or Restoring (Importing) a Camera Configuration 31
Installing a Camera Firmware Update 32
Rebooting the Camera 33
Contacting Vaddio Technical Support 34
Accessing the Diagnostic Logs 34
Configuring Camera Behavior 35
Configuring IP Streaming 35
Setting up RTSP Streaming in Easy Mode 36
Setting up RTSP Streaming in Custom Mode 37
RTSP Streaming Protocol and URL 38
Configuring RTMP Streaming 39
Advanced: Changing MTU 41
Stopping the IP Stream 41
Adjusting the Focus 42
Defining Video Mute Behavior for the RoboSHOT 40 UHD Camera 42
Lighting and Color Adjustments: Setting up Custom CCU Scenes 43
Lighting Adjustments 44
Fine-Tuning Image Quality and Color 45
Saving Color and Lighting Settings 45
Lighting and Image Quality Cheat Sheet 46
Color Adjustment Cheat Sheet 47
Setting the Custom Home Position and Other Preset Shots 48
Renaming Presets and Custom CCU Scenes 48
Setting the Speed for Manual Movements 49
Setting the Direction for Camera Movements 49
Genlock Settings and Adjustments – RoboSHOT 40 UHD Only 50
Reading the Camera's Switches 51
Software Switch Settings – RoboSHOT 40 UHD Only 52
Software Switch Settings – Both Models 53
Operating the Camera from the Web Interface 54
Switching the Camera Off or On (Standby) 54
Stop or Resume Sending Video (Mute) 54
iii
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras