Software Switch Settings – Both Models
S
YSTEM PAGE
, DIP S
WITCHES TAB
The DIP Switches tab of the System page provides access to these features:
n
Color
– YCbCr (default) or sRGB.
n
3G Level A/Level B
– Default is Level A.
n
LED color scheme
– Status light color codes for Pro AV (broadcast, the default setting) or UC (unified
conferencing).
n
LED on/off
– When the LED is set to OFF, it remains off even when the camera is sending video.
n
Standard Control Mode/Codec Control Mode
– Select Codec Control Mode if using the camera with
a third-party codec.
n
Enable LED in Standby
– When the LED is enabled in standby mode, it illuminates purple to show
that the camera is in standby but connected to power. When the LED is disabled in standby mode, it is
only on when the camera is active (sending video or updating firmware).
53
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
