To configure the camera with a static IP address:
1. Work with your IT department to determine the correct IP address, subnet mask, and gateway to
assign.
2. On the Networking page, set IP Address to Static.
3. Enter the IP address, subnet mask, and gateway as directed by the IT staffer; then save your work.
The camera is now ready to be connected to the network.
Changing the Camera's Hostname
N
ETWORKING PAGE
If your network supports hostname resolution, you may find it convenient to change the camera's
hostname to something easy to remember, such as
camera-center-boardroom
.
Work with your IT department to ensure that the new hostname conforms to the organization's naming
conventions.
25
Complete Manual for RoboSHOT 20 UHD and RoboSHOT 40 UHD Professional PTZ Cameras
