Sageon III Power System
Distribution Option Kit Installation
PM990-8800-00, Rev. 9
7-3
FIGURE 7-3 DISTRIBUTION AREA, RIGHT SIDE
7.1 AM1 DISTRIBUTION, TIERS 2 AND 3, GROUPS A & B
This section describes installation of a kit for adding AM1 type breaker distribution. Kit
contents and part numbers are listed below. Installation of circuit breakers and fuses is described
in Chapter 8.
The figure at right shows many of the components included in the kit: the U-shaped bus bar,
distribution assembly, assembly support bracket, and required hardware. There are two kits. Kit
PN 385.5881.00 is for installation in Group A. Kit PN 385.5881.01 is for installation in Group
B.
Figure 7-4 shows the orientation of the AM1 distribution assemblies. It also shows routing of
the supply cables upward through the open top of the rack and the daisy-chained alarm wiring.
