VIRDI 6000
TM
Administrator Manual
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng
3.2.1.5. User Fingerprint Options
User fingerprint options only apply if a fingerprint has been registered. These options are
advanced features, and should only be set if needed. If no fingerprint is registered this icon will
not be visible.
There are two options available
1) 1:1 Verification Level – this is the ‘security level’ of the registered fingerprint. The higher the
number, the higher the security level. There is a higher chance of authentication failing if the
security level is too high.
2) 1:N Enabled/Disabled – 1:N means One to many. This means the user’s fingerprint is
matched only by comparing fingerprint information. If this option is disabled the user is then
1:1, the user will be required to enter their ID number first then enter their fingerprint for
authentication. If this option is disabled and an attempt is made to enter a fingerprint only, the
terminal will not allow access.
Touch the finger options icon and a window will appear with the current 1:1 level. Enter a value
from 0-5. 0 = low security level, 5 = higher security level.
Touch
to cancel and close the window at anytime.
Enter the value, the touch OK.
The next window will appear. Touch OK to enable 1:N or Cancel to disable 1:N.
