Union Community VIRDI 6000 Configuration Manual Download

Page: 55 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.5.3.2. Set Current Date

Touch the current date that is displayed in the edit box, a calendar will appear.

Month:

You can either; touch the ‘Next Month’ or ‘Previous Month’ arrow icons and scroll to the

month you want or you can touch the Month Name and directly select the month you want.

Year:

Touch the year number and then an arrow up/down icon will appear. Touch the up or down

button until the number you want appears.

Date:

Touch the calendar number of the date you want. The date will appear in yellow. Press OK

when finished.

Note: The date should always be the last item you program.

Year

Select

Month

Date

Selector

Month

Selector

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands