Union Community VIRDI 6000 Configuration Manual Download

Page: 41 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.2.3. Modifying a User

Modifying an existing user requires that you know the user ID of the user you wish to change. You
must enter the user ID to change the user settings.

Touch the

icon to modify an existing user.

A window will appear to enter a user ID. Enter the user ID you wish to change.

Touch

icon if you have made a mistake when entering a number

When finished entering the user ID number touch

If the user does not exist you will hear an error sound and a message window will show.

If successful you will see a user information window, See

3.2.1.0. User Registration Window

Repeat any steps in section 3.2.1.X to add a new fingerprint, card, and password or change other
options. Touch the save icon when finished.

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands