Union Community VIRDI 6000 Configuration Manual Download

Page: 47 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

Touch the

icon to change to this mode. A time schedule icon will appear.

3.4.3.1 Meal Mode Schedules

Touch the

icon to change the start time, normal time and finish time. See

section

1.1.6. Touchscreen Usage

. Touch the area you wish to change and a number

pad will appear for you to enter your data. Touch ‘Done’ to save and finish. Each

programmable time area is self explanatory. For each area enter a time range that best

represents that time. Each field requires two time entries, this is a range for example

Breakfast Time is from 08:00 to 10:00.

Ticket Print Check Box: Touch this area to enable/disable the ticket print. This option will

enable the option to print a record at each transaction.

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands