Union Community VIRDI 6000 Configuration Manual Download

Page: 54 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.5.4. Date/Time Settings

Touch the Date/Time icon. Then touch the area which you would like to change.

3.5.3.2. Display Format

The Date/Time Display Format will change the way the date and time is displayed on the main
screen. There are six choices:

Short form day (three letters), Short form month (three letters), DD, YYYY, HH:MM
AM/PM (Thu, Mar 24 2009 08:19AM)

Short form day(three letters), Short form month (three letters), DD, YYYY, HH:MM
(24 hour time) (Thu, Mar 24 2009 23:44)

MM-DD-YY HH:MM AM/PM (03-24-09 08:19AM)

MM-DD-YY HH:MM (24 hour time) (03-24-09 23:44)

YYYY-MM-DD HH:MM AM/PM (2009-04-24 08:19AM)

YYYY-MM-DD HH:MM (24 hour time) (2009-04-24 23:44)

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands