Union Community VIRDI 6000 Configuration Manual Download

Page: 46 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.4.2.1 Time & Attendance Schedules

Touch the

icon to change the start time, normal time and finish time. For

programming the times see section

1.1.6. Touchscreen Usage

. Touch the area you wish

to change and a number pad will appear for you to enter your data. Touch ‘Done’ to save

and finish. For each area enter a time range that best represents that time.

Each field requires two time entries; this is a range for example start time is from 08:00

to 10:00

Start Time: This is the time that represents the start of the day, a normal time range of

when the employees arrive at the office for that day.

Normal Time: This is the time between the start time and finish time, the time of normal

working hours.

Finish Time: This is the time that represents the end of the work day, normally when

employees begin to leave the office for the day.

3.4.3. Meal Application

Meal Application is for systems that require tracking of user’s meal time. If the system is

setup for Meal mode; for authentication the user is required to touch the mode function

key before entering their ID, Card or Fingerprint. See Section

4.4.3. Cafeteria

Application

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands