Union Community VIRDI 6000 Configuration Manual Download | Manualshive

Page: 73 / 85

background image

VIRDI 6000

TM

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

3.9. USB Options

The USB options area will allow you to import and export files to and from the terminal. User data,
log data, pictures, images and firmware upgrading can be performed. It is recommended that your
USB  have  at  least  250mbytes  available  for  storage.  You  cannot  select  any  options  in  this  area
until  a  USB  device  is  connected.  The  USB  device  can  be  connected  at  anytime  before  or  after
entering  this  area.  Once  you  connect  your  device  you  must  wait  up  to  10  seconds  before  the
terminal will recognize it and a ‘detected’ message will appear.

NOTE: AT ANYTIME DURING FIRMWARE UPGRADE OR IMPORTING/EXPORT DO NOT
REMOVE THE USB DEVICE. THE SYSTEM MAY BECOME UNUSABLE IF YOU REMOVE THE
USB DEVICE DURING A FIRMWARE UPGRADE.

If the USB device is not connected this message will appear. Touching Cancel will close the

window, or you can insert the USB device.

Once the USB device is connected a message will appear indicating the USB type.

If the USB is connected properly you will see this window and you can now select the

options you want.

«
...
71
72
73
74
75
...
»

Summary of Contents for VIRDI 6000






















































































Reviews:

No comments

Related manuals for VIRDI 6000

Brand: QFX Pages: 44

Brand: lasmex Pages: 10

Brand: NAD Pages: 4

Brand: NAIM Pages: 27

Brand: Eminent Pages: 31

Brand: Linear Technology Pages: 22

Brand: QUAD Pages: 2

Brand: Onkyo Pages: 15

Brand: Peachtree Audio Pages: 56

EXT-DVI-2-HDSDISSL

Brand: Gefen Pages: 21

Brand: Velleman Pages: 27

S-1000MM-M2xx05

Brand: Perle Pages: 12

Brand: Hagerman Audio Labs Pages: 6

Brand: T+A Pages: 72

Brand: Schaub Lorenz Pages: 18

Brand: Grundig Pages: 24

Brand: NAD Pages: 79

Brand: i. Tech Dynamic Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands