Union Community VIRDI 6000 Configuration Manual Download

Page: 83 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

4.4.3. Cafeteria Application

Cafeteria or Meal Application is for systems that require tracking of user’s meal time. If the
system is setup for

Time and Attendance, for authentication the user is required to press the mode function key
before entering their

ID, Card or Fingerprint. Anytime the mode is changed the top status bar will show the current
mode. (Breakfast,

Lunch, Dinner, Snack, Normal).

Access Mode

– Touch the

or the

button then authenticate with card, ID,

password or fingerprint. This is normal Access Mode.

Meal 1 Mode

– Touch the

then authenticate with card, ID, password or fingerprint.

Meal 2 Mode

– Touch the

then authenticate with card, ID, password or fingerprint

Meal 3 Mode

– Touch the

then authenticate with card, ID, password or fingerprint

Meal 4 Mode

– Touch the

then authenticate with card, ID, password or fingerprint

Note: Meal times can be fixed depending on the programming of the administrator for Breakfast,
Lunch, Dinner, Snack or supper.

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands