Union Community VIRDI 6000 Configuration Manual Download

Page: 19 / 85

VIRDI 6000

Administrator Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng

Be aware of certain fingerprint conditions

Depending on the user’s fingerprint condition, some fingerprints may not be
used or may cause an inconvenience.

If the fingerprint is damaged or very unclear, then it cannot be recognized.

Please use a password instead in this case.

When a finger is dry, breathe on the finger for smooth operation.

For kids, it may be tricky or impossible to use the terminal because their

fingerprints are too small or very unclear. It is recommended to register
their fingerprints every six months.

For the elderly, it may not be possible to register their fingerprints if there

are too many fine lines on the fingerprints.

If fingerprints are very unclear, it may be convenient if you register 2~3

fingerprints.

It is recommended that you register more than 2 fingerprints.

Summary of Contents for VIRDI 6000





















































































Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands

Union Community VIRDI 6000, Configuration Manual

Search results

Summary of Contents for VIRDI 6000

Reviews:

Related manuals for VIRDI 6000

Brands by name

Popular brands