VIRDI 6000
TM
Administrator Manual
UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr/eng
< Glossary>
l
Admin, Administrator
-
As a user who can enter into the terminal menu mode, he can
register/modify/delete terminal users and change the operating environment
by changing settings.
-
If there is no administrator for a terminal, anyone can change the settings. In
this regard, it is recommended to register at least one administrator.
-
Caution is required with registration and operation because an administrator
has the right to change critical environmental settings of the terminal.
l
1 to 1 Verification
-
A user’s verification fingerprint (template) is compared to the user’s enrollment
fingerprint (template) previously registered. The terminal performs 1:1
matches against the user’s enrolled template until a match is found.
-
It is called 1 to 1 Verification because only the fingerprint registered in the
user’s ID or card is used for comparison.
l
1 to N Identification
-
The terminal performs matches against multiple fingerprints (templates) based
solely on fingerprint information.
-
Without the user’s ID or card, the user’s fingerprint is compared to fingerprints
previously registered.
l
I-Capture (Intelligent Capture)
-
Reinforces detection capability for residual fingerprints (fingerprints left on a
sensor window due to sweat or contaminants on a finger) and automatically
adjusts sensor settings to detect good-quality fingerprints regardless of the
conditions (dry or wet) of the fingerprints.
l
Authentication level
-
Depending on the fingerprint match rate, it is displayed from 1 to 9.
Authentication is successful only if the match rate is higher than the set level.
-
The higher the Authentication level, the higher the security. However, it
requires a relatively high match rate, so Authentication is vulnerable to failure.
-
1:1 Level: Authentication level used for 1:1 verification
-
1:N Level: Authentication level used for 1:N identification
l
Authentication Method
-
Various kinds of authentication including FP (fingerprint) authentication, PW
(password) authentication, RF (card) authentication, or a combination of these
methods
-
Ex) FP|PW: fingerprint or password authentication; password is used for
authentication if fingerprint authentication fails
