WLAN Interface
Handset Registration
WLAN Interface
Handset Registration
To be able to register, each VoWiFi handset must be programmed with the IP address of the
WSG used, refer to the Configuration Manual for respective VoWiFi handset.
WLAN System
WLAN system handles the VoWiFi handset relogin time and authentication. A handset is con-
sidered to be logged out if it has not made a relogin within a certain time. Call diversion display
text, Extended activity logging are also enabled in this view.
To find settings for WLAN System, do as follows:
1)
Click “Configuration” on the start page.
2)
Select Other Settings > Advanced Configuration in the menu in the on the Configuration
page.
3)
Select “WLAN System” under WLAN Interface in the menu in the on the Advanced Configu-
ration page.
• Handset relogin time The time before a handset must relogin is set in minutes and when
this time is exceeded the handset will be considered unreachable. This is the maximum
time it takes for a handset to reconnect after installing a new or updating the WSG. Note
that a short relogin time implies a higher service/security but it also loads the system.
• Call Diversion Display Text Text specified in the “Call Diversion Display Text” text field is, if
enabled, added to the display text when a call diversion takes place. By entering the char-
acter “%”, the original call ID will be included in the display text on the place where the
character is entered. Note that some characters are special characters that are not visible.
• Enable Extended Activity Log Enable Extended Activity Log for intermediate logs.
• Authentication Method The very first time a VoWiFi handset logs in, it must authenticate it-
self with a password. The password is then stored in the handset for future authentication.
The WSG has three authentication alternatives; “Common password”, “User server” and
“Number as password”.
• Common Password A common password can be specified in the WSG, and this password
is then used for all VoWiFi handsets in the system. If the common password field is left
empty, the handset must send an empty password for authentication.
• Allow Force Login
The function is only valid when the authentication method is set to “Common pass-
word” or to “Number as password”. The very first time a VoWiFi handset logs in, it
must authenticate itself with a password. The password is then stored in the handset
for future authentication. The WSG has three authentication alternatives; “Common
password”, “User server” and “Number as password”.
Forced login allows a user to login with a call number that already is in use. The handset
that already is logged in will then be unregistered.
A31003-M2000-M105-01-76A9, 29/06/2020
Wireless Service Gateway WSG, Administrator Documentation
75
