Device Configuration
Device Management Setup
Device Configuration
Device Management Setup
Device management is used for setting addresses to interfaces that the devices are connected
to. The specified interfaces will then inform the Device Manager about all logged in devices.
1)
Click “Configuration” on the start page.
2)
Select Other Settings > Advanced Configuration, on the
Configuration
page.
3)
Click “Device Management”.
Figure 26: The Device Management Page
4)
Enter WSG address to the interfaces that the devices are connected to.
5)
Click “Activate”.
Service Discovery
Service Discovery allows automatic detection of WSG, devices and services on a network with-
out prior configuration. WSG, services and devices that shall belong to a certain WSG must be
set to the same domain ID.
1)
Click “Configuration” on the start page.
2)
Select Other Settings > Advanced Configuration on the Configuration page.
3)
Under Other, click “Service Discovery” in the menu on the Advanced Configuration page.
4)
In the Domain ID field, enter the Service Discovery Domain ID.
5)
Click “Activate”
A31003-M2000-M105-01-76A9, 29/06/2020
60
Wireless Service Gateway WSG, Administrator Documentation
