Gigarouter
UF72N User Manual
Page 111 of 203
Figure 4-30 Configure Static IP Parameter
The following items are displayed on this part.
►
Interface Name:
Name of this LAN interface.
►
IP Address:
Enter the IP address for this LAN interface.
►
Netmask:
Enter the subnet mask for this LAN interface.
►
NAT:
Optional Enable or disable NAT for
this LAN interface
►
Assign NAT IP:
Optional If NAT is selected. NAT IP address can be assigned.
►
Enable DHCP Server:
Enable or disable DHCP server on this LAN interface.
►
Start IP:
If
Enable DHCP Server
is selected, enter the Start IP address to define a
range for the DHCP server to assign dynamic IP addresses. This address
should be in the same IP address subnet with the IP address of this LAN
interface.
►
End IP:
If
Enable DHCP Server
is selected, enter the End IP address to define a
range for the DHCP server to assign dynamic IP addresses. This address
should be in the same IP address subnet with the IP address of this LAN
interface.
►
Netmask:
If
Enable DHCP Server
is selected, enter the
Netmask
to define a range
for the DHCP server to assign dynamic IP addresses.
Summary of Contents for UNIFIBER GIGAROUTER UF72N
