UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 47 / 210

Gigarouter
UF72N User Manual
Page 39 of 203
►
HTTPS Port: Port used with HTTPS access device.
HTTPS : it is the result of simply layering the Hypertext Transfer Protocol (HTTP) on
top of the SSL/TLS protocol.
Internet Web Access:
►
Allow Access: If enabled, allow user to access the device from the Internet via WEB.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Internet via
WEB.
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that is only allowed to access
to the device from the Internet via WEB.
►
IPv6 Range: If IP Limit enabled, specifies the IPv6 address range that is only allowed to access
to the device from the Internet via WEB.
Intranet Web Access:
►
Allow Access: If enabled, allow user to access the device from the Intranet via WEB.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Intranet via
WEB.
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that is only allowed to access
the device from the Intranet via WEB.
►
IPv6 Range: If IP Limit enabled, specifies the IPv6 address range that is only allowed to access
the device from the Intranet via WEB.
3.4.4.4.2 TELNET
Choose the menu Data Service → Firewall Config → Netword Access-Ctrl → TELNET to load the
following page.
Figure 3-54 Configure Telnet Access-Ctrl
The following items are displayed on this screen:
►
Port: Port when using telnet tools access device.
Internet Web Access:
►
Allow Access: If enabled, allow access to the device from the Internet via telnet.
►
IP Limit: If enabled, allow only specific IP range to access the device from the Internet via
telnet
►
IP Range: If IP Limit enabled, specifies the IPv4 address range that only allow access to the