UniData Communication Systems UNIFIBER GIGAROUTER UF72N User Manual Download Page 115

Page: 115 / 210

Gigarouter

UF72N User Manual

Page 107 of 203

►

Gateway:

Optional. If Static IP is selected, configure the default gateway of WAN port.

DHCP

is selected:

►

Appoint Server IP:

Optional. If network has multiple DHCP servers, enter the IP address of your

ISP’s DHCP server.

►

Vendor Class Identifier:

Optional.

This option (60) is used by DHCP clients to optionally identify the

vendor type and configuration of a DHCP client.

►

Enterprise Code:

Optional.

►

Manufacture Name:

Optional.

►

Device Class:

Optional.

►

Device Type:

Optional.

►

Device Version:

Optional.

Input “5” to configure OTHER2 parameter as below:

Figure 4-23 Configure OTHER2 Interface Parameter

The following items are displayed on this screen:

►

Enable:

Enable this WAN interface (DATA can’t be disabled).

►

Type:

Select L2TP if your ISP provides a L2TP connection.

►

VLAN Enable:

Optional. Enable VLAN to configure VLAN ID and VLAN Priority Level.

►

VLAN ID:

Optional. VLAN ID of this WAN interface.

►

Priority Level:

Optional. VLAN Priority Level of this WAN interface.

►

Primary DNS:

Enter the IP address of your ISP’s Primary DNS (Domain Name Server). If

Summary of Contents for UNIFIBER GIGAROUTER UF72N



















































































































































































































Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 115 / 210

Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews: