UniData Communication Systems UNIFIBER GIGAROUTER UF72N User Manual Download Page 191

Page: 191 / 210

Gigarouter

UF72N User Manual

Page 183 of 203

Figure 4-136 Configure User Supplementary

The following items are displayed on this screen:

►

Min Flash Detect Time:

The minimum time to detect the flash.

►

Max Flash Detect Time:

The maximum time to detect the flash.

►

Flash Key Enable:

Whether to enable digit detect after flash.

►

Switch&Release Call:

If the digit specified is detected after flash, terminate the active call and

recover the call on hold.

►

Three Party Call:

If the digit specified is detected after flash, enter the conference mode.

►

Reject Key:

If the digit specified is detected after flash, reject the call on hold.

►

Switch Call Key:

If the digit specified is detected after flash, hold the active call and

recover the call on hold.

►

Keep the hold call when onhook:

If selected, when hanging up in this context, the telephone rings

Summary of Contents for UNIFIBER GIGAROUTER UF72N



















































































































































































































Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 191 / 210

Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews: