UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 209 / 210

Gigarouter
UF72N User Manual
Page 201 of 203
► ACS Address: Enter the IP address or domain name of ACS.
► ACS Port: Enter the port of ACS.
► ACS Server Name: Enter the TR069 server name of ACS.
► SSL Enable: Enable or disable the SSL(Secure Sockets Layer) for TR069.
► Schedular Send Inform: Whether or not the CPE must periodically send CPE information to
Server using the Inform method call. Enter the duration in
seconds of the interval if enabled.
► Single Account Enable: Whether or not the TR069 Account is enabled.
► TR069 Account: Username used to authenticate the CPE when making a
connection to the ACS.
► TR069 password: Password used to authenticate the CPE when making a
connection to the ACS.
► Connection Request Auth: Whether to authenticate an ACS making a Connection Request to
the CPE.
► Connection Request Username: Username used to authenticate an ACS making a Connection
Request to the CPE.
► Connection Request Password: Password used to authenticate an ACS making a Connection
Request to the CPE.
► CPE Server Name: A part of the HTTP URL for an ACS to make a Connection
Request notification to the CPE. In the
form:http://host:port/
path
► CPE Port: A part of the HTTP URL for an ACS to make a Connection
Request notification to the CPE. In the
form:http://host:
port /path
► Status: Connection Status when CPE making a connection to the ACS.
Read only.
► Fail Reason: Show reason for the failure when CPE making a connection to
the ACS. Read only.
4.5.7 SNMP
The command “show snmp” show the snmp information as below:
Figure 4-162 Show SNMP Information