UniData Communication Systems UNIFIBER GIGAROUTER UF72N User Manual Download Page 122

Page: 122 / 210

Gigarouter

UF72N User Manual

Page 114 of 203

Figure 4-33 Configure Advanced Parameter

The following items are displayed on this part.

►

LAN Isolate:

Check the box to prohibit the access between LAN interfaces.

►

Auto Bridge:

Check the box to dynamically create IPTV bridge for STB.

►

DHCP Vendor ID:

Vendor class identifier List (DHCP 60 option), support at most two vendor IDs.

►

IPAddress:

IP address of interface for STB data service.

►

Netmask:

Subnet mask of interface for STB data service.

►

VID:

VID of IPTV VLAN.

►

PRI:

Priority level of IPTV VLAN.

►

Automatic:

Check the box to automatically detect the VID of STB data service.

4.2.5 WLAN

4.2.5.1 Show WLAN Parameter

The command “show wlan” show the WLAN configuration as below:

Figure 4-34

Show WLAN Parameter

Input “1” to show basic settings as below:

Summary of Contents for UNIFIBER GIGAROUTER UF72N



















































































































































































































Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 122 / 210

Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews: