UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 66 / 210

Gigarouter
UF72N User Manual
Page 58 of 203
Figure 3-84 View IPSEC Safety Policy Configuration
Click the Index in the entry you want to modify. If you want to delete the entry, select it and click the Del .
Click the Add button to add a new entry.
Figure 3-85 Add or Modify IPSEC Safety Policy Entry
The following items are displayed on this screen:
►
Enable Ipsec: Enable or disable this IPSEC entry.
►
IPSEC Policy Name: Specify a unique name to the IPSEC policy.
►
Select Interface: Specify the local WAN port for this Policy.
►
VPN Mode: Select the network mode for IPSEC policy. Options include:
Site To Site: Select this option when the client is a network.
PC to Site: Select this option when the client is a host.
►
Local Subnet IP & Local Subnet Netmask: Specify IP address range on your local LAN to identify
which PCs on your LAN are covered by this policy.
►
Remote Address: If PC to Site is selected, specify IP address on your remote network to
identify which PCs on the remote network are covered by this policy.
►
Remote Subnet IP & Remote Subnet Netmask: Specify IP address range on your remote network
to identify which PCs on the remote network are covered by this policy.
►
IKE Safety Policy: Specify the IKE policy. If there is no policy selection, add new policy on
VPN → IPSec → IKE Safety Policy page.
►
Enable Safety Prososal: If enabled, Select IPSEC Proposal. If there is no policy selection, add new
IPSEC proposal on VPN → IPSec → IPSEC Safety Proposal page. Up to