UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual

Page: 127 / 210

Gigarouter
UF72N User Manual
Page 119 of 203
the air.
► Isolated: Enable or disable isolate different clients from the same wireless station.
► LAN Isolated: Enable or disable isolation between the LAN and SSID.
► Max Client: Enter the maximum number of clients allowed to connect to the SSID.
► SSID AP Isolated: This function can isolate wireless stations on your network from each other.
Wireless devices will be able to communicate with the Router but not with
each other. To use this function, check this box. AP Isolation is disabled by
default.
Input “2” to configure security parameter as below:
Figure 4-43 Configure Security Parameter
The following items are displayed on this part.
► SSID: The SSID enabled in WLAN → Basic Settings page.Read only
► Authentication: The authentication type selected: WPA-PSK, WPA2-PSK, WPAPSK/WPA2PSK.
► Algorithm: When WPA2-PSK or WPAPSK/WPA2PSK is set as the Authentication Type,
you can select either TKIP , or AES or TKIP/AES as Encryption. When
WPA-PSK is set as the Authentication Type, you can select either TKIP or
AES as Encryption.
► WPA Pre-Shared Key: You can enter ASCII characters between 8 and 64 characters.
► Renew Interval: Specify the group key update interval in seconds. Enter 0 to disable the update.
Input “3” to configure advanced settings as below: