UniData Communication Systems UNIFIBER GIGAROUTER UF72N User Manual Download Page 114

Page: 114 / 210

Gigarouter

UF72N User Manual

Page 106 of 203

Figure 4-22 Configure OTHER1 Interface Parameter

The following items are displayed on this screen:

►

Enable:

Enable this WAN interface (DATA can’t be disabled).

►

Type:

Select PPTP if your ISP provides a PPTP connection.

►

VLAN Enable:

Optional. Enable VLAN to configure VLAN ID and VLAN Priority Level.

►

VLAN ID:

Optional. VLAN ID of this WAN interface.

►

Priority Level:

Optional. VLAN Priority Level of this WAN interface.

►

Primary DNS:

Enter the IP address of your ISP’s Primary DNS (Domain Name Server)

manually. If you are not clear, please consult your ISP. It’s not allowed to
access the Internet via domain name if the Primary DNS field is blank.

►

Secondary DNS:

Optional. If a Secondary DNS Server address is available, enter it.

►

Server IP:

Enter the Server IP provided by your ISP.

►

Username:

Enter the Account Name provided by your ISP. If you are not clear, please

consult your ISP.

►

Password:

Enter the Password provided by your ISP.

►

Enable Encryption:

Enable PPTP link encryption.

Secondary Connection:

Here allow you to configure the secondary connection. DHCP and Static IP

connection types are provided.
If

Static

is selected:

►

IP Address:

If Static IP is selected, configure the IP address of WAN port.

►

Netmask:

If Static IP is selected, configure the subnet mask of WAN port.

Summary of Contents for UNIFIBER GIGAROUTER UF72N



















































































































































































































Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

Related manuals for UNIFIBER GIGAROUTER UF72N

Brands by name

Popular brands

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual

Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

Related manuals for UNIFIBER GIGAROUTER UF72N

Brands by name

Popular brands