UniData Communication Systems UNIFIBER GIGAROUTER UF72N User Manual Download Page 121

Page: 121 / 210

Gigarouter

UF72N User Manual

Page 113 of 203

Figure 4-32 Configure Port Mode Parameter

The following items are displayed on this part.

►

Port:

The physical LAN port name (LAN1~LAN4).

►

Route/Bridge:

Mode of this physical LAN port. The following four modes are provided:

Route:

route to WAN

Transparent bridge:

not modify the packets;

Tagged bridge:

LAN untagged, WAN tagged; only 1 VID supported

Promisc Mode:

Tagged packets in bridge mode, untagged packets in route mode;

most 5 VIDs supported (e.g. 8, 10, 13).

►

VLAN ID List:

If Tagged bridge/Promisc Mode is selected, configure the VID/VIDs.

Input “4” to configure advanced parameters as below:

Summary of Contents for UNIFIBER GIGAROUTER UF72N



















































































































































































































Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews:

UniData Communication Systems UNIFIBER GIGAROUTER UF72N, User Manual, Page: 121 / 210

Search results

Summary of Contents for UNIFIBER GIGAROUTER UF72N

Reviews: