Section 4
Using the TROY Printer Utility
Using the
Auto-Rotate
Feature
Due to minor variations in registration (the precise alignment of text and images on the printed page) that exists
with most printers, it is recommended that the MICR line on your checks be positioned to print on the leading
edge of the printed page (the edge of the page that exits the printer first). MICR lines positioned on the trailing
edge of the page may be subject to small variations in the vertical placement of the MICR line, which may cause
the MICR line position to fall outside of the MICR line specifications. If the MICR line is located on the trailing
edge of the page, use the Auto-Rotate feature to automatically rotate your check image 180-degrees on the page.
T
O
R
OTATE THE
C
HECK
I
MAGE
:
1.
From the
Main Window
, click on
Settings
, and
then click on
ExPT Offsets
.
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
4-30
2.
Click on the
Image Rotate
drop-down box and
select
Enable
.
3.
After all desired values have been entered, click
on
Update Printer
to send the new settings to the
printer.
All previous MICR line and image offset
values in the printer will be overwritten
. The
system will prompt you with “
Print Quality
Document to verify adjustments?
” Click on
Yes
to print the quality document, or click on
No
to
proceed without printing the quality document.
4.
When closing the ExPT Offsets window, the
system will prompt you with “
Do you want to
save changes to ExPT Offset values?
” Click on
Yes
to save the new offset values in a user-named file for
future use (e.g., Acme print job offset values.ops), or click on
No
to continue without saving the new offset
values.
NOTE: TROY IRD 9050 1
UP
series printers must have the 100-sheet multipurpose tray installed to use standard-size
forms for printing the Print Quality Document.
